首 頁 Home | 公司簡介 About Us | 新 聞 News | 產 品 Products | 行業解決方案 Solution | 聯絡我們 Contact Us | 搜尋 Search
按下檢視 :
編譯器 C/C++ Compiler
你現在的位置 > Flash 存貯器和磁盤測試儀 > SD MMC CF Card Tester and Duplicator

聯絡我們 : [香港] (852)2310-9662 / [中國] (86)137-6115-6455

 
 

 

SD MMC CF Card Tester and Duplicator

The M7100 is a 4 to 64 socket bench top Production Tester for Flash devices such as IDE ATA SSD’s, Compact Flash Cards, SD Cards, and Linear Flash Cards. The M7100 is a modular tester supporting a variety of device types. Each M7100 can hold up to eight modules and thus the maximum capacity is either 32 or 64 devices depending upon the number of sockets per module.

CF-SD-MMC Testing Functions:
-Fast parallel tester executing user defined test scripts that are constructed using a powerful yet easily understood GUI (Graphical User Interface)
-DC parametric leakage testing with 1 ua resolution
-ICC measurement
-VCC margining
-Write/read speed testing
-User defined mode
-Command testing including controller specific low level formatting

Initial production of Flash devices invariably requires low level formatting and possible special hardware interfacing. The modular structure of the M7100 hardware and software allows the M7100 to be easily adapted to the low level formatting and testing of a wide variety of Flash devices including SD cards, CF cards, IDE single chip PATA devices, linear Flash memory devices, etc.

The M7100 runs under a full featured Linux operating system with a 17" LCD, keyboard, and mouse. Network interface is through 10/100 Ethernet connection.

A complimentary engineering tester, the M7200 CF/SD Engineering Tester is available which holds up to two of the M7100 adapters and shares the identical hardware and software capabilities of the M7100.

The M7200 is an Engineering Production Tester for Flash devices such as IDE ATA SSD’s, Compact Flash Cards, SD Cards, and Linear Flash Cards. The modular construction allows support of various device types with removable modules. Each M7200 can hold up to two modules and thus the maximum capacity is either 8 or 16 devices depending upon the number of sockets per module.

CF-SD-MMC Testing Functions:
-Fast parallel tester executing tests which are made using a powerful yet easily understood GUI (Graphical User Interface)
-Test scripts are stored either on a resident high capacity removable hard drive or on a connected network server.
-DC parametric leakage testing
-ICC measurement
-VCC margining
-Write/read speed testing
-User defined mode and command testing

Initial Production of Flash devices invariably requires low level formatting and possible special hardware interfacing. The modular structure of the M7100 hardware and software has allowed the M7200 to successfully perform low level formatting and testing to a wide variety of Flash devices including SD cards, CF cards, IDE single chip PATA devices, linear Flash memory devices, etc.

The M7200 runs under a full featured Linux operating system with a 17" LCD, PC keyboard, and mouse. Network interface is through 10/100 Ethernet connection.

A complimentary bench top production tester, the M7100 Bench Top Production Tester is available which holds up to eight of the M7200 adapters and provides up to 32 or 64 device test sockets depending up the modules used. The M7200 and the M7100 share identical hardware and software capabilities allowing development and testing of test scripts on the M7200 to be used directly on the M7100 without modification .

 

欲了解更多詳情,請聯絡我們

 

 

 
© Copyright 2008 Flash Technology (HK) Limited. All Rights Reserved.